{{tag>vpn}}
====== Openvpn installation ======
Install
apt install openvpn
Enable ip forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward
===== Simple setup with static key =====
This simple setup with static key is really only usable with single client and server, unless you want to run separate openvpn instances on different server ports with different server configurations.
cd /etc/openvpn/
openvpn --genkey --secret static.key
Set up the server.conf, here's a minimum konfiguration
dev tun
ifconfig 10.8.0.1 10.8.0.2
secret /etc/openvpn/static.key
cipher AES-256-CBC
And client.conf
remote 1.2.3.4
dev tun
ifconfig 10.8.0.2 10.8.0.1
secret static.key
#route 4.5.6.7 255.255.255.255 vpn_gateway
redirect-gateway def1
cipher AES-256-CBC
Note the ''static key'' and ''redirect-gateway'' options. Redirect gateway will route all client's traffic to go through VPN. For visiting public sites you will need to setup SNAT/MASQUERADING on firewall. See below.
Uncomment ''route'' and comment out ''redirect-gateway'' if you only want to route traffic to specific IP e.g. 4.5.6.7
Start the openvpn on both server and client. Server:
/etc/openvpn# openvpn server/server.conf
and client
sudo openvpn client.ovpn
Both commands should show at the end something like:
...
2024-04-09 10:25:08 Peer Connection Initiated with [AF_INET]1.2.3.4:port
2024-04-09 10:25:08 Initialization Sequence Completed
To verify that the VPN is running, you should be able to ping 10.8.0.2 from the server and 10.8.0.1 from the client.
===== Setup for multiple clients - one server =====
This is the "proper" way to do it when there are multiple clients involved.
==== Certificate generation ====
Download the easy-rsa:
wget https://github.com/OpenVPN/easy-rsa/releases/download/v3.1.7/EasyRSA-3.1.7.tgz
tar xf EasyRSA-3.1.7.tgz
cd EasyRSA-3.1.7
Copy vars.example to vars and change variables accordingly. vars will be automatically sourced by easy-rsa script.
cp vars.example vars
Also add the ''keyEncipherment'' option in //x509-types/client// file otherwise you will get an error like
''Client failed: unsupported certificate purpose'' eg.
etc/openvpn/EasyRSA-3.1.7# cat x509-types/client
# X509 extensions for a client
basicConstraints = CA:FALSE
subjectKeyIdentifier = hash
authorityKeyIdentifier = keyid,issuer:always
extendedKeyUsage = clientAuth
keyUsage = digitalSignature, keyEncipherment
1. Initialize the PKI directories
./easyrsa init-pki
2. Create the CA. Used in client and server configuration:
./easyrsa build-ca
3. Generate Diffie-Hellman (DH) params.
./easyrsa gen-dh
4. Create the vpn server's sign request and then certificate. This should be used in server.conf ''cert'' along with ''key'' which will also be generated with these commands. Here you need to provide the password of the CA.key in step 2:
./easyrsa gen-req server nopass
./easyrsa sign-req server server
5. Create client signing request and certificate. Change EntityName, ''nopass'' if you don't want private key to be encrypted
./easyrsa gen-req EntityName nopass
./easyrsa sign-req client EntityName
For each new client just repeat last step.
==== Creating configuration files for server and clients ====
=== Server ===
You can copy the example file and adapt the fields to your config
cp /usr/share/doc/openvpn/examples/sample-config-files/server.conf server.conf
Edit the ca, cert, key, and dh parameters to point to the files you generated and any other configuration you need. Also create the ta.key
openvpn --genkey tls-auth ta.key
Also create the openvpn user
adduser --no-create-home --disabled-login openvpn
and uncomment this in server.conf
...
;user openvpn
;group openvpn
...
=== Client ===
cp /usr/share/doc/openvpn/examples/sample-config-files/client.conf client.conf.example
* Like the server configuration file, first edit the ca, cert, and key parameters to point to the files you generated.
* Edit the ''remote'' directive to point to the hostname/IP address and port number of the OpenVPN server
* Ensure that the client configuration file is consistent with the directives used in the server configuration. The major thing to check for is that the dev (tun or tap) and proto (udp or tcp) directives are consistent. Also make sure that comp-lzo and fragment, if used, are present in both client and server config files.
You can now try running the openvpn on client and server like mentioned in Simple setup above.
===== Firewall setup =====
==== Shorewall ====
Example configuration.
///etc/shorewall/interfaces//
###############################################################################
#ZONE INTERFACE BROADCAST OPTIONS
net eth0 detect tcpflags,logmartians,nosmurfs,dhcp
vpn tun0
///etc/shorewall/zones//
###############################################################################
#ZONE TYPE OPTIONS IN OUT
# OPTIONS OPTIONS
fw firewall
net ipv4
vpn ipv4
///etc/shorewall/snat// - this will masq all traffic to appear to be coming from the IP of the server running Openvpn.
MASQUERADE 10.8.0.0/24 eth0
///etc/shorewall/policy//
###############################################################################
#SOURCE DEST POLICY LOG LEVEL LIMIT:BURST
$FW net ACCEPT
$FW vpn ACCEPT
vpn $FW ACCEPT
vpn net ACCEPT
net all DROP info
# The FOLLOWING POLICY MUST BE LAST
all all REJECT info
///etc/shorewall/rules// - connect to openvpn service at this port
...
ACCEPT net $FW udp 1194
...
==== iptables ====
iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE
===== Running openvpn server as a service =====
Debian 12 ships with systemd units for this. The way to run it is to first make sure the server configuration file is located in ///etc/openvpn/server// directory. The file must end with .conf. So if you have a configuration file called ''myvpnserver.conf'' you need to run it as
systemctl enable --now openvpn-server@myvpnserver
Check logs with
journalctl -xefu openvpn-server@server.service
====== Tested on ======
* Debian 12 Bookworw
* shorewall 5.2.8
====== See also ======
* [[wiki:ovpn_file_example]]
====== References ======
* https://openvpn.net/community-resources/static-key-mini-howto/
* https://wiki.archlinux.org/title/Shorewall#/etc/shorewall/masq
* https://serverfault.com/questions/480069/how-to-force-all-traffic-through-vpn
* https://openvpn.net/community-resources/how-to/#setting-up-your-own-certificate-authority-ca-and-generating-certificates-and-keys-for-an-openvpn-server-and-multiple-clients
* https://www.openssl.org/docs/man1.1.1/man5/x509v3_config.html
* https://shorewall.org/OPENVPN.html