Differences

This shows you the differences between two versions of the page.

--- wiki:megacli_drive_rebuild [2022/10/08 09:54] – created antisa
+++ wiki:megacli_drive_rebuild [2022/11/12 11:55] (current) – [See also] add megacli replace disk antisa
@@ Line 6: / Line 6: @@
   CRITICAL: megacli:[Volumes(2): DISK0.0:Degraded,DISK1.1:Degraded: Devices(4): 06,07,04=Online 05 (WD-WCC1P1090364WDC WD2000FYYZ-01UL1B1 01.01K02)=Unconfigured(bad)]
-You need to rebuild the drive. First use [[|smartctl]] to check if the disk is ok.
+You need to rebuild the drive. First use [[wiki:smartctl_commands#smartctl_megaraid_check|smartctl]] to check if the disk is ok.
 Then check which disk is bad with
@@ Line 60: / Line 60: @@
 ====== See also ======
   * [[wiki:megacli_commands|megacli commands]]
+  * [[wiki:output_megacli_predictive_error|output megacli predictive error]]
+  * [[wiki:megacli_replace_disk|megacli replace disk]]
 ====== References ======
   * https://supportforums.cisco.com/t5/security-documents/recovering-a-disk-shown-as-unconfigured-bad-in-raid/ta-p/3116431