antisaWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
{{tag>networking}}

====== Add additional ip address on interface ======

  ip addr add 94.130.84.168/27 dev eth0


  root@server:~# ip addr add 94.130.84.168/27 dev eth0

///etc/network/interfaces// example (for persistence over reboot):

<code>
root@server ~ # cat /etc/network/interfaces
### Hetzner Online GmbH installimage

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback
iface lo inet6 loopback

auto eno1
iface eno1 inet static
  address 94.130.84.168
  netmask 255.255.255.128
  gateway 94.130.84.129
  # route 94.130.84.128/25 via 94.130.84.129
  up route add -net 94.130.84.128 netmask 255.255.255.128 gw 94.130.84.129 dev eno1
  up ip addr add 94.130.84.239/25 dev eno1
  down ip addr del 94.130.84.239/25 dev eno1
  up ip addr add 94.130.84.240/25 dev eno1
  down ip addr del 94.130.84.240/25 dev eno1
  up ip addr add 94.130.84.231/25 dev eno1
  down ip addr del 94.130.84.231/25 dev eno1
  up ip addr add 94.130.84.230/25 dev eno1
  down ip addr del 94.130.84.230/25 dev eno1
  up ip addr add 94.130.84.229/25 dev eno1
  down ip addr del 94.130.84.229/25 dev eno1

iface eno1 inet6 static
  address 2a01:4f8:c0:20cb::2
  netmask 64
  gateway fe80::1

auto br0
iface br0 inet static
  address 10.10.10.1
  netmask 255.255.255.0
  bridge_ports none
  bridge_fd 0
  bridge_stp off
  bridge_maxwait 5
  pre-up /sbin/brctl addbr br0

</code>

====== Tested on ======
  * 

====== See also ======

====== References ======