Table of Contents
Access device on different subnet on Mikrotik
Example setup:
Remove ether2 interface from the bridge, Bridge > Ports.
On ether2 interface add 192.168.1.101/24 address (if not taken), IP > Addresses.
Add masquerading for that interface under IP > Firewall > NAT
You should now be able to ping the device at IP 192.168.1.1 from device 192.168.99.2 on the subnet 192.168.99.0/24.
Tested on
- Tcom Speedport W 724V Ci
- Mikrotik hAP Lite RouterBOARD 952Ui-5ac2nD
See also
| 2021/05/01 12:31 | |
| 2021/06/02 10:15 | |
| 2025/07/09 18:04 | |
| 2025/08/24 09:36 | |
| 2021/05/14 14:16 | |
| 2021/02/04 10:18 | |
| 2025/02/15 20:55 | |
| 2021/05/14 14:20 | |
| 2025/06/24 15:51 |