antisaWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

{{tag>networking mikrotik subnets}}

====== Access device on different subnet on Mikrotik ======
Example setup:


Remove ether2 interface from the bridge, **Bridge > Ports**.
{{:wiki:screenshots:bridge_ports_20210501_142437.png?600|}}

On ether2 interface add 192.168.1.101/24 address (if not taken), **IP > Addresses**.
{{:wiki:screenshots:ip_addr_20210501_142258.png?600|}}

Add masquerading for that interface under **IP > Firewall > NAT
**
{{:wiki:screenshots:masq_20210501_142622.png?900|}}


You should now be able to ping the device at IP 192.168.1.1 from device 192.168.99.2 on the subnet 192.168.99.0/24.

====== Tested on ======
  * Tcom  Speedport W 724V Ci
  * Mikrotik hAP Lite RouterBOARD 952Ui-5ac2nD

====== See also ======
  * [[wiki:mikrotik_openvpn_setup|Mikrotik OpenVPN setup]]
====== References ======
  * https://forum.mikrotik.com/viewtopic.php?t=117527