User Tools

Site Tools


wiki:openvpn_installation

This is an old revision of the document!


Openvpn installation

Install

apt install openvpn

Enable ip forwarding

echo 1 > /proc/sys/net/ipv4/ip_forward

Simple setup with static key

This simple setup with static key is really only usable with single client and server, unless you want to run separate openvpn instances on different server ports with different server configurations.

cd /etc/openvpn/
openvpn --genkey --secret static.key

Set up the server.conf, here's a minimum konfiguration

dev tun
ifconfig 10.8.0.1 10.8.0.2
secret /etc/openvpn/static.key
cipher AES-256-CBC

And client.conf

remote 1.2.3.4
dev tun
ifconfig 10.8.0.2 10.8.0.1
secret static.key

#route 4.5.6.7 255.255.255.255 vpn_gateway
redirect-gateway def1

cipher AES-256-CBC

Note the static key and redirect-gateway options. Redirect gateway will route all client's traffic to go through VPN. For visiting public sites you will need to setup SNAT/MASQUERADING on firewall. See below. Uncomment route and comment out redirect-gateway if you only want to route traffic to specific IP e.g. 4.5.6.7

Start the openvpn on both server and client. Server:

/etc/openvpn# openvpn server/server.conf

and client

sudo openvpn client.ovpn

Both commands should show at the end something like:

...
2024-04-09 10:25:08 Peer Connection Initiated with [AF_INET]1.2.3.4:port
2024-04-09 10:25:08 Initialization Sequence Completed

To verify that the VPN is running, you should be able to ping 10.8.0.2 from the server and 10.8.0.1 from the client.

Setup for multiple clients - one server

This is the “proper” way to do it when there are multiple clients involved.

Certificate generation

Download the easy-rsa:

wget https://github.com/OpenVPN/easy-rsa/releases/download/v3.1.7/EasyRSA-3.1.7.tgz
tar xf EasyRSA-3.1.7.tgz
cd EasyRSA-3.1.7

Copy vars.example to vars and change variables accordingly. vars will be automatically sourced by easy-rsa script.

cp vars.example vars

Also add the keyEncipherment option in x509-types/client file otherwise you will get an error like Client failed: unsupported certificate purpose eg.

etc/openvpn/EasyRSA-3.1.7# cat x509-types/client 
# X509 extensions for a client

basicConstraints = CA:FALSE
subjectKeyIdentifier = hash
authorityKeyIdentifier = keyid,issuer:always
extendedKeyUsage = clientAuth
keyUsage = digitalSignature, keyEncipherment

1. Initialize the PKI directories

./easyrsa init-pki

2. Create the CA. Used in client and server configuration:

./easyrsa build-ca

3. Create the vpn server's sign request and then certificate. This should be used in server.conf cert along with key which will also be generated with these commands. Here you need to provide the password of the CA.key in step 2:

./easyrsa gen-req server nopass
./easyrsa sign-req server server

3. Create client signing request and certificate. Change EntityName, nopass if you don't want private key to be encrypted

./easyrsa gen-req EntityName nopass
./easyrsa sign-req client EntityName

5. Generate Diffie-Hellman (DH) params.

./easyrsa gen-dh

For each new client just repeat step 3.

Creating configuration files for server and clients

Server

You can copy the example file and adapt the fields to your config

cp /usr/share/doc/openvpn/examples/sample-config-files/server.conf server.conf

Edit the ca, cert, key, and dh parameters to point to the files you generated and any other configuration you need. Also create the ta.key

openvpn --genkey tls-auth ta.key

Also create the openvpn user

adduser --no-create-home --disabled-login openvpn

and uncomment this in server.conf

...
;user openvpn
;group openvpn
...

Client

cp /usr/share/doc/openvpn/examples/sample-config-files/client.conf client.conf.example
  • Like the server configuration file, first edit the ca, cert, and key parameters to point to the files you generated.
  • Edit the remote directive to point to the hostname/IP address and port number of the OpenVPN server
  • Ensure that the client configuration file is consistent with the directives used in the server configuration. The major thing to check for is that the dev (tun or tap) and proto (udp or tcp) directives are consistent. Also make sure that comp-lzo and fragment, if used, are present in both client and server config files.

You can now try running the openvpn on client and server like mentioned in Simple setup above.

Firewall setup

Shorewall

Example configuration.

/etc/shorewall/interfaces

###############################################################################
#ZONE   INTERFACE       BROADCAST       OPTIONS
net     eth0      detect          tcpflags,logmartians,nosmurfs,dhcp
vpn     tun0

/etc/shorewall/zones

###############################################################################
#ZONE   TYPE    OPTIONS                 IN                      OUT
#                                       OPTIONS                 OPTIONS

fw      firewall
net     ipv4
vpn     ipv4

/etc/shorewall/snat - this will masq all traffic to appear to be coming from the IP of the server running Openvpn.

MASQUERADE      10.8.0.0/24     eth0

/etc/shorewall/policy

###############################################################################
#SOURCE         DEST            POLICY          LOG LEVEL       LIMIT:BURST

$FW             net             ACCEPT

$FW             vpn             ACCEPT
vpn             $FW             ACCEPT

vpn             net             ACCEPT
net             all             DROP            info

# The FOLLOWING POLICY MUST BE LAST
all             all             REJECT          info

/etc/shorewall/rules - connect to openvpn service at this port

...
ACCEPT          net             $FW             udp     1194
...

iptables

iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE

Tested on

  • Debian 12 Bookworw
  • shorewall 5.2.8

See also

References

wiki/openvpn_installation.1712741597.txt.gz · Last modified: 2024/04/10 11:33 by antisa

Except where otherwise noted, content on this wiki is licensed under the following license: CC0 1.0 Universal
CC0 1.0 Universal Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki