wiki:megacli_commands
Table of Contents
megacli commands
Info
megacli -LDInfo -Lall -aAll megacli -AdpAllInfo -aALL megacli -PDList -aALL
Check disk for predictive error count
megacli -PDList -aAll | egrep "Enclosure Device ID:|Slot Number:|Inquiry Data:|Error Count:|state|Device Id:"
Rebuild drive
megacli -PDRbld -ShowProg -PhysDrv[252:1] -a0
Check battery (BBU)
megacli -AdpBbuCmd -aALL
Delete virtual drive 1
megacli -CfgLdDel -L1 -a0
No writeback cache
megacli -LDSetProp -NoCachedBadBBU -Immediate -Lall -aAll
ROM flash
megacli -adpfwflash -f imr_fw.rom -a0
Create raid 1
megacli -CfgLdAdd -r1 [32:0,32:1] WB NORA Direct NoCachedBadBBU -strpsz64 -a0
Create raid 10
megacli -CfgSpanAdd -R10 -Array0 [252:4,252:5] -Array1 [252:6,252:7] WB NORA Direct -strpsz64 -a0
raid 1 from 4 disks
megacli -CfgLdAdd -r1 [32:2,32:3] WB RA Direct CachedBadBBU -a0
In square brackets are Enclosure Id:Slot Id. Check those with
megaCli -PDList -aALL
Tested on
See also
References
wiki/megacli_commands.txt · Last modified: 2022/10/29 13:29 by antisa